Do You Need A Router With TP-Link Deco

In the Deco network, the main Deco must be wired to a modem, router, or an internet cable to get internet access. In other words, Deco cannot be set up to connect to an existing router wirelessly. However, the satellite Deco can connect to the existing Deco network wirelessly.

Also, Do You Know Do I need a router if I have Deco?

A: Deco is designed to replace most home routers. If your old router need a modem to access the internet, then Deco should be used together with the existing modem.

Generally Does Deco replace your router? If you have a modem/router typically given by the ISP then you will not be able to swap that out for the Deco. You will instead connect one of the Deco units to one of the LAN ports of your modem/router and set it up from there. The reason is the Deco is not able to act as a modem since it only has Ethernet ports.

Frequently Asked Questions(FAQ)

Does TP-link Deco x20 need a modem?

Deco is an internet sharing device and can’t provide internet itself. If you don’t have a modem but is able to access the internet directly through an Ethernet jack on the wall, then Deco can be wired to the Ethernet jack and then share the internet with the clients after the configuration is completed.

Do I need a router with my mesh system?

Yes, a mesh network’s purpose is to replace the need for a router. The only time you may need to use your existing router is if it also works as a modem for providing you with an internet connection. Otherwise, you should expect to replace your router entirely with the mesh network, just like when buying a new router.

Is Deco mesh a modem?

It’s both a VDSL Modem and Mesh WiFi router, offering impressive, super VDSL2 speeds and a true seamless roaming WiFi 6 experience, allowing you to walk through your home and stay connected to the fastest possible speed.

How good is Tplink Deco?

The result is a mesh Wi-Fi system whose excellent performance and strong feature set belie its incredibly low price. It has quickly become one of our favourite cheap mesh Wi-Fi units, rivalling even the mighty Google Wifi.

How do I connect my Deco to my router?

Launch the Deco APP.

Login or tap Sign Up to set up a TP-Link ID. …
Tap Let’s Begin, select the Deco icon according to your Deco’s model number.
Unpack the contents of the box. …
Disconnect your modem’s power and tap Next
Connect one of your Deco units to your modem via Ethernet cable and power on both devices.

How do I add Deco to my existing network?

Adding an additional unit to your TP-Link Deco network

Tap [+] on the top right corner of the Deco app to add a new Deco unit. …
Select the Deco icon according to the model number of your Deco unit.
Select the layout that looks like your home, tap Next.

Does the main Deco have to be connected to Ethernet?

A: Yes, the primary Deco unit must be connected to your existing network via Ethernet. The other Deco units can be connected to your primary Deco via Mesh WiFi or via Ethernet backhaul, depending on your preference.

Is Deco M4 a router?

Flexible and multifunctional, the Deco M4 includes a variety of features allowing it to serve as a router or access point. Just choose the mode for your actual network demands and experience the maximum wireless flexibility.

What does a modem do vs a router?

Your modem is a box that connects your home network to the wider Internet. A router is a box that lets all of your wired and wireless devices use that Internet connection at once and also allows them to talk to one another without having to do so over the Internet.

How do I connect my device to Deco?

How to connect a device to my Deco?

Deco supports both wired and wireless connections.
For wireless devices, you only need to search Deco’s Wi-Fi name on the client and connect with the Wi-Fi password.
Besides, each Deco provides two Ethernet ports on the back for wired devices such as PC, printers, TVs, etc.

Which is better mesh WiFi or router?

In some situations, mesh Wi-Fi can allow for faster speeds, better reliability and greater wireless coverage of your home than a conventional router would. As systems, they’re also very scalable and quick to customise.

What are the disadvantages of a mesh network?

Disadvantages of Mesh Topology :

It’s costly as compared to the opposite network topologies i.e. star, bus, point to point topology.
Installation is extremely difficult in the mesh.
Power requirement is higher as all the nodes will need to remain active all the time and share the load.
Complex process.

What is the difference between a mesh router and a regular router?

A regular Wi-Fi router creates a single access point that broadcasts Wi-Fi signals to a limited area whereas mesh networks link two or more access points which are also called nodes together.

Is a Deco M5 a router?

The Deco M5 includes three identical units; each is a router with two network ports. When used together, two units automatically work as range extenders or access points.

What is a Deco router?

Deco Mesh uses WiFi nodes that work together to cast stronger, more reliable WiFi throughout your whole home, so you never lose your connection as you move from room to room. ¹. Deco Mesh provides more reliable WiFi throughout your whole home.

Can you connect Deco with Ethernet cable?

Ethernet Backhaul is a feature that makes it possible to wire the Deco units together. Thanks to this feature, every two Deco units can be wired with an Ethernet cable. And Deco will transmit data between the two units through the Ethernet connection, which is more stable and faster than Wi-Fi.

Is Deco true mesh WiFi?

The Deco M5 takes advantage of the unique capabilities of a mesh network and, just as with the other tongue-in-the-cheek expressions (but definitely witty, such as paint the house with WiFi), TP-Link uses what is called the ART feature (Adaptive Routing Technology).

Which is the most powerful TP-link Deco?

TP-Link Deco W7200 Mesh Router Review: The One You’ve Been Waiting For. TP-Link wins our Editors’ Choice Award for offering fast speeds and terrific mesh performance at an unbeatable price.

How many deco mesh do I need?

All the Deco units are connected through the Wi-Fi backhaul connection. In this case, we recommend no more than 10 Deco units in the network to ensure Wi-Fi performance. Also, we recommend no more than three hops in the networks.

How do I connect my router to mesh?

Although each mesh network vendor’s setup process differs in detail, all follow the same general procedure: After you choose a system, download its app to your phone. Unplug the router and connect the main node to it using an Ethernet cable. Reconnect the router and let it and the main node power up.

Can you connect Ethernet to mesh WiFi?

Mesh WiFi and Ethernet Mesh pods wired via Ethernet can still be used wirelessly if you want or need them too. However, connecting nodes with a wired Ethernet connection will greatly improve your Internet speed and connection performance overall.

What is bridge mode router?

What is bridge mode? Bridge mode is the configuration that disables the NAT feature on the modem and allows a router to function as a DHCP server without an IP Address conflict.

How many devices can connect to Deco?

Incredibly fast AC1200 speeds makes the deco capable of providing connectivity for up to 100 devices.

How do I add a second router to my TP Link router?

Select Wireless->Wireless Settings on the left side, enter a SSID for the name of the wireless network and select a channel. Save and reboot the router. Connect your computer to the other wireless router, and repeat the Step 1 and step 2, after reboot both of the two routers, the wireless connection will be set up.

Can you mix mesh two different routers?

The Wi-Fi Alliance, which oversees the use of Wi-Fi standards, is introducing a new standard called EasyMesh, which will allow router manufacturers to make mesh routers that work with mesh routers from other companies. As long as both routers support EasyMesh, you’ll be able to put them on the same network.

Why is my Deco not connecting to the internet?

Check the LED on the main Deco. If the main Deco has a red LED, unplug the ethernet cable between the modem and Deco. Restart both of the two devices, wait for about 5 minutes, then connect the main Deco back to the modem and check if the issue has been resolved automatically.