Tp link tc-w7960 wifi not working solution

If you are having trouble connecting to the WiFi on your TP-Link TC-W7960 router, there is a fix that you can try. This article will outline the steps that you need to take in order to resolve the issue.

What to do if your TP-Link TC-W7960 WiFi does not work

If you are experiencing problems with your TP-Link TC-W7960 wireless router, there are a few solutions that you can try. First, try restarting the router. If that doesn’t work, try unplugging and replugging the router into the wall outlet. If that still doesn’t work, you can try to reset the router back to its factory settings.

How to fix a broken TP-Link TC-W7960 WiFi

TP-Link’s TC-W7960 is a dual-band 802.11ac WiFi router that retails for $129.99 on Amazon. However, some users have been experiencing problems with the router not working properly. This problem can be resolved by following these simple steps:

1)Make sure that your computer is connected to the router with an Ethernet cable.

2)Open the Network and Sharing Center on your computer and click on the “view available Networks” icon in the lower right corner.

3)Right-click on the name of your router and choose “Properties”

4)Select the “General” tab and click on the “Advanced Settings” button.

5)Select the “Adapter Settings” button and click on the “TCP/IPv4” tab.

6)Click on the radio button next to “Use the following IP address” and enter your router’s IP address (192.168.1.1).

7)Click on the “OK” button and close the window.

8)Do a quick internet search for the IPv4 address of your router (192.168.1.1)

What can I do if the login page does not appear?

1. If the computer is set to a static or fixed IP address, change the setting to obtain an IPaddress automatically.
2. Make sure http://tplinkmodem.net browser.
3. Use another web browser and try again.
4. Reboot your modem router and try again.
5. Disable then re-enable the network adapter being used.

How do I restore the modem router to its factory default settings?

• With the modem router powered on, press and hold the Reset button on the rear panel of themodem router for approximately 8 seconds until all LEDs turn back on, then release the button.
• Log in to the web management page of the modem router. Go to Advanced > System tools >Backup & Restore and click Reset. The modem router will restore and reboot automatically
• Note:Once the modem router is reset, the current configuration settings will be lost and you will need tore-configure the router.

How to fix a broken TP-Link TC-W7960 WiFi using a third party software

A lot of people are finding that their TP-Link TC-W7960 wifi router is not working properly. Some say that it’s not connecting to the internet, while others say that they’re getting error messages when trying to use it. There are several possible solutions to this problem, so read on for more information on what could be causing your wifi connection to fail. What may be causing your wifi connection to fail?

There are several possible causes of a wireless connection failing to connect. These include the router, modem, or computer.

Troubleshooting tips and troubleshooting methods for any WiFi issue

If you have a WiFi issue, there are a few things you can do to troubleshoot it. First, try checking your network settings. Make sure your router is set up correctly and that the networks you’re trying to connect to are listed in the router’s list of available networks. If they’re not, try connecting to other networks in the area until you find one that works.

If that doesn’t work, you may need to check your WiFi connection itself. To do this, turn off all devices in your home except for your computer and try reconnecting wirelessly. If that still doesn’t work, try plugging in a USB cable into your computer and connecting it directly to your router. If that still doesn’t work, your WiFi card or adapter might be fried and you’ll need to replace it.